Compact FS2 with Remote Float Sensor
A range of condesate pumps have been designed for use with all types of air conditioning equipment where the need of a cost effective trouble free mechanical removal of condensate water is required.
These two models provide the most comprehensive range of condensate removal pumps currently available on the market.
These pumps offer self priming heads up to 4 metres (12 feet), pumping heads up to 9 metres (27 feet) and flow rates up to 43 litres/hr (27 US gallons).
The high performance of these two pumps makes them ideal for use on all types of air conditioning up to a cooling capacity of 60KW, 180,000 BTU's or 17 Tons.
Both models come with the SP10 remote float sensor as standard, however if a in-pan or electronic sensor is required, we offer a choice of 3 models of in-pan sensor all suitable for these models.
Other standard features include, high level alarm contacts rated at 2A 230v AC to control the AC unit if the pump is unable to remove the condensate and Intelligent Overload Protection that prevents damage to the pump motor if the suction/discharge pipes are restricted or the pump has been mis-applied.
| Technical Specification | |
| Electrical | |
| Voltage | 230v 50Hz |
| Power | 30W |
| Performance | |
| Pumping Head | 9 Metres |
| Self Priming | 4 Metres |
| Cooling Capacity | 20KW |
| Noise Level | 28-32 dBa |
| Inlet I.D | 6mm |
| Outlet I.D | 6mm |
| Physical | |
| Height | 50mm |
| Length | 145mm |
| Width | 50mm |
More Information at Birch Sales
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: