Nano 4 - With Remote Float Sensor & Ducting Kit
The nano range of condesate pumps have been designed for use with all types of air conditioning equipment where the need of a cost effective trouble free mechanical removal of condensate water is required.
All models provide the most comprehensive range of condensate removal pumps currently on the market.
These pumps offer self priming heads up to 4 metres (12 feet), pumping heads up to 20 metres (60 feet) and flow rates up to 43 litres/hr (27 US gallons).
The high performance of the nano range makes them ideal for use on all types of air conditioning up to a cooling capacity of 60KW, 180,000 BTU's or 17 Tons.
All models come complete with a remote level sensor, built into a specially designed reservoir suitable for use in most types of air conditioning equipment. The sensor has been designed to give long trouble free operation with minimal maintenance. Typical maintenance in a standard office enviroment is approximately 18 months.
Other standard features include, high level alarm contacts rated at 2A 230v AC to control the AC unit if the pump is unable to remove the condensate and Intelligent Overload Protection that prevents damage to the pump motor if the suction/discharge pipes are restricted or the pump has been mis-applied.
| Technical Specification | |
| Electrical | |
| Voltage | 230v 50Hz |
| Power | 17W |
| Performance | |
| Pumping Head | 4 Metres |
| Self Priming | 2 Metres |
| Cooling Capacity | 10KW |
| Noise Level | 26dBa |
| Inlet I.D | 4mm |
| Outlet I.D | 4-6mm |
| Physical | |
| Height | 27mm |
| Length | 65mm |
| Width | 50mm |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: